473nm Blue Lasers (300-600mW)

DPSS XXXX Laser

 
 
Specifications:
Model
 
SDL-473-XXXT
Output Power @ 25 ℃
 
300-600mW
Wavelength
 
473±1nm
Operation Mode
 
CW, near TEM00
Power stability after warm-up
 
<1%, <3%, <5% (over 2/4/8 hours)
Warm-up time
 
< 10 minutes
M2 factor
 
<2. 0
Beam Divergence (1/e2, Full Angle)
 
< 1.5mrad
Beam diameter at the aperture
 
~3mm
Beam height from base plate (mm)
 
29mm
Polarization ratio
 
>100:1
Noise of amplitude (rms, 1~20MHz)
 
~30%
Point stability after warm-up
 
<0.05mrad
Operating temperature
10℃~35℃
Dimensions of Laser head
 
156 × 77 × 60mm
Power supply
 
SDL-PS-500
Input Voltage  
90-264VAC
Modulation
TTL Modulation or Analog Modulation
Expect life time  
10000 hours
Warranty time
 
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.