1319nm IR Lasers

DPSS XXXX Laser


Specifications:

Model
SDL-1319-QSL-XXXT
Wavelength(nm)
1319±1nm
Single pulse energy
10~15μJ
Operation Mode
Q-switched pulsed laser
Pulse duration
~10ns
Peak power
~1000W
Transverse Mode
TEM00
Average power
Average power (mW) = Single pulse energy (μJ) * Rep. rate (kHz)
Rep. rate (kHz)
Controllable
Specified One rep. rate, such as 1k, 2k, 3k, up to 4kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period).
Different rep. rate in the range of 1Hz-4kHz can be obtained by input an external TTL signal.
Uncontrollable
Undefined rep. rate among 5k-20kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses.
Ave power stability
<1%,<3%,<5% (over 2/4/8 hours)
Beam Divergence (1/e2, Full Angle)
< 1.5mrad
Warm-up time
< 10 minutes
Beam Diameter
~2.0mm
Dimensions of laser head
142 × 73 × 46mm
Power supply
PS-300 (90~264VAC)
Dimension of Power supply
133 × 130 × 62mm
Operating temperature
15-35℃
Beam height from base plate
24.8mm
Expect life time
10000 hours
Warranty time
1 year

Note:  
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.