660nm Red Lasers (1-80mW)

DPSS XXXX Laser


Specifications:

Model
SDL-660-LM-XXXT
Output Power @ 25 ℃
1-80mW
Wavelength
660nm
Dimension

Φ8x18mm,Φ8x30mm,Φ12x37mm,

Φ14x70mm,Φ16x110mm,20x20x50mm

Supply voltage
DC3~5V
Operating current
<260mA
Beam parameters
Elliptical <10%, Beam Dia <2mm
Beam divergence (1/e2, Full Angle)
<1.5mrad
Point Stability after warm-up
0.05mrad
Power Stability after warm-up
<5% (over 2 hours)
Optics
glass lens both sides AR coated
Wire length
150mm
Operating temperature -10℃~+40℃
Storage temperature
-40℃~+80℃
Expect life time
>3000 hours
Warranty time
6 months

Note:  
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.