671nm Red Lasers (500-1200mW)

DPSS 671nm Low Noise Laser


Specifications:

Model
SDL-671-LN-XXXT
Output Power @ 25 ℃
500~1200mW
Wavelength
671±1nm
Operation Mode
CW, near TEM00
Beam height from base plate (mm)
29mm
Linear Polarization
>100:1
Beam Diameter at the aperture
~3.0mm
Beam Divergence (1/e2, Full Angle)
<2.0mrad
Power Stability after warm-up
<1%, <3%, <5% (over 2/4/8 hours)
M2 factor
<2.0
Warm-up time
<15 minutes
Dimension of laser head
156 x 77 x 60mm
Power Supply
SDL-PS-500
Dimension of Power Suply
238 x 146 x 94mm
Input Voltage
90-264VAC, 50/60Hz
Modulation
TTL Modulation >5KHz or analog Modulation >2KHz
Operating Temperature
10℃~35
Expect life time
10000 hours
Noise of amplitude (rms, 1~20MHz)
<1%
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.