593nm Yellow Lasers

DPSS XXXX Laser



Specifications:

Model
SDL-593-LN-XXXT
Output Power @ 25 ℃
1-30mW
 
Wavelength
593±1nm
Operation Mode
CW ~TEM00
Linewidth
<0.1nm
Linear Polarization
>100:1
Beam Diameter at the aperture
< 1.5mm
Beam Divergence (1/e2, Full Angle)
<1.5mrad
Power Stability after warm-up
<1%, <3%, <5% (over 2/4/8 hours)
Point Stability after warm-up
0.05mrad
Noise of amplitude
<1% (RMS, 10Hz - 20MHz)
Warm-up time
<15 minutes
Dimension of Laser head
142 x 73 x 46mm
Power Supply
SDL-PS-300
Input Voltage
85~250VAC, 50/60Hz
Dimension of power supply
130 x 120 x 62mm
Operating Temperature
10℃~35℃
Expect life time (hours)
10000 hours
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.