355nm Pulsed Lasers (1-80mW)
 
 
Specifications :
Model
 
SDL-355-XXXQ
Wavelength (nm)
 
355nm
Ave Output Power
 
1-80mW
Operating mode
 
Frequency conversion of Q-switched pulsed laser
Peak power (mW)
 
~10W
Single pulse energy
~0.1~20μJ
Pulse duration
~10ns
Average power (mW)
Average power (mW) = Single pulse energy (uJ) * Rep. rate (kHz)

Rep. rate (kHz)

  Controllable
Specified One rep. rate, such as 1k, 2k, 3k, up to 4kHz, with stable laser pulses emitting (stable pulse energy, peak, duration and period).
Uncontrollable

Different rep. rate in the range of 1Hz-4kHz can be obtained by input an external TTL signal.

Undefined rep. rate among 5k-20kHz and unstable laser pulse emitting. Suitable for the applications only needing high peak power pulses.

Ave power stability after warm-up  
<1%,<3%,<5% (over 2/4/8 hours)
Transverse mode
 
Near TEM00
Warm-up time
 
<15 minutes
Beam parameters
 
>60%,
Dimensions of laser head (mm)
 
212 × 88 × 74mm
Beam height from base
45mm
Beam Diameter
<2mm
Polarization ratio
>100:1
Power supply (110 or 220VAC)
SDL-PS-500
Operating Temperature
 
10℃~35℃
Dimensions of power supply
 
238 ×146 × 102mm
Expected Operating Lifetime
 
10000 hours
Warranty time
 
1 year
 
Note:
See the Glossary and Technology for information about the terms used  
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter.  
Other Sytles and custom designs are available. Contact us to discuss your needs.