1064nm Light Red Lasers (1-50mW)F

DPSS 1064nm Laser


Specifications:

Model
SDL-1064-XXXF
Output Power @ 25 ℃
1~50mW
Wavelength
1064±1nm
Operation Mode
CW TEM00
Beam height from base plate (mm)
24. 8mm
Point Stability after warm-up
<0.05mrad
Beam Diameter at the aperture
~2. 0mm
Beam Divergence (1/e2, Full Angle)
<1.5mrad
Power Stability after warm-up
<1%, <3%, <5% (over 2/4/8 hours)
M2 factor
<1.2mm
Warm-up time
<10 minutes
Dimension of laser head
142 x 73 x 46mm
Power Supply
SDL-PS-100
SDL-PS-300
Input Voltage
90-264VAC or 5VDC, 50/60Hz
Dimension of Power Supply
100 x 60 x 56mm
130 x 120 x 62mm
Modulation
TTL Modulation >5KHz or analog Modulation >2KHz
Operating Temperature
10℃~35
Expect life time
10000 hours
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.