1053nm Light Red Lasers

DPSS 1053nm Laser


Specifications:

Model
SDL-1053-XXXT
Output Power @ 25 ℃
1-10000mW
Wavelength
1053+-1nm
Operation Mode
CW, TEM00
Power stability after warm-up
<1,<3%,<5% (over 2/4/8 hours)
M2 factor
< 1.5
Warm-up time
< 10 minutes
Beam divergence (1/e2, Full Angle)
< 1.5mrad
Beam diameter at the aperture
<2.0mm
Polarization ratio
> 50:1
Point stability after warm-up
<0.05mrad
Operating temperature
1035
Dimension of laser head
142 × 73 × 46mm
Power Supply
SDL-PS-300
Dimension of power supply
130 × 120 × 62mm
Modulation
TTL Modulation >5KHz or analog Modulation >2KHz
Expect life time
10000 hours
Warranty time
1 year
 
 
 
 
 
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.