DPSS 1342nm Laser
|
|
 |
 |
|
Specifications:
|
|
Model
|
SDL-1342-XXXT |
|
Output Power @ 25 ℃
|
4-6W |
|
Wavelength
|
1342+/-1nm |
|
Operation Mode
|
CW, TEM00 |
|
Spectral line width
|
<0.1nm |
|
Power stability after warm-up
|
<1,<3%,<5% (over 2/4/8 hours) |
|
Warm-up time
|
< 10 minutes |
|
M2 factor
|
< 2 |
Beam divergence (1/e2, Full Angle)
|
<2.0mrad |
|
Beam diameter at the aperture
|
<3.0mm |
|
Point stability after warm-up
|
<0.05mrad |
|
Polarization ratio
|
>100:1 |
|
Ellipticity of beam
|
< 10% |
|
Operating temperature
|
10-35℃ |
|
Dimension of Laser head
|
333 x 140 x 125mm |
|
Power supply
|
SDL-PS-800 |
|
Dimension of power supply
|
300 x 162 x 134mm |
|
Expect life time
|
10000 hours |
|
Warranty time
|
1 year |
|
Modulation
|
TTL Modulation >5KHz or analog Modulation >2KHz |
| |
|
| Note: |
 |
See the Glossary and Technology for information about the terms used |
 |
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter. |
|
Other Sytles and custom designs are available. Contact us to discuss your needs. |
|
* Detailed Laser Head and power supply info of each power version will be provided on request.
* 4 or 8 hours Longer operation period output power stability are available on request.
* Better (<3%,<1%) power stability are available on request.
* Other version Laser Head and power supply are available on request.
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* High frequency AOM modulation on requested.
* Line output version are available on request.
* Fiber coupled system is available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.
