266nm UV Lasers (100-300mW)

DPSS 266nm Q-switched Pulsed Deep UV Laser

   


Specifications:

Model
 
SDL-266-QSL-XXXT
Wavelength
 
266±1nm
Output average power
 
50-300mW
Transverse mode
 
Near TEM00
Operation Mode  
Frequency conversion of Q-switched pulsed laser
Single pulse energy
 
5~15μJ
Pulse duration
 
~15ns
Peak power  
~450W
Average power
 
Average power (mW) = Single pulse energy (μJ) * Rep. rate (kHz)
Ave power stability after warm-up
 
<1%, <3%, <5% (over 2/4/8 hours)
Warm-up time
 
<15minutes
Beam parameters
 
Elliptical (4:1), Beam spot ~2mm
Beam diameter at the aperture
 
~2mm
Polarization ratio
 
>100:1
Point stability after warm-up
 
<0.05mrad
Dimensions of Laser head
 
330 × 140 × 125mm
Power supply
 
SDL-PS-800
Dimensions of power supply
 
300 × 162 × 134mm
Expected Operating Lifetime  
8000 hours
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.