671nm Red Lasers

DPSS XXXX Laser

Specifications:
Model
SDL-671-SLM-XXXT
Output Power
1-10mW
Wavelength
671±1nm
Operation Mode
CW, TEM00 , Single Longitude Mode
Beam Diameter at the aperture
< 1.5mm
Power Stability after warm-up
<1%, <3%, <5% (over 2/4/8 hours)
Noise of amplitude
<1% (RMS, 10Hz - 20MHz)
Beam Divergence (1/e2, Full Angle)
<1.5mrad
M2 factor
<1.5
Spectra Linewidth
<0.0001nm
Point Stability after warm-up
<0.05mrad
Dimension of laser head
142 × 73 × 46mm
Power Supply
SDL-PS-300
Input Voltage
85~250VAC, 50/60Hz
Operating Temperature
1035
Dimensions of power supply
130 × 120 × 62mm
Warm-up time
<15 minutes
Polarization ratio
>100:1
Expected Lifetime (hours)
10000 hours
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer tothe technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.