1310nm IR Lasers

DPSS XXXX Laser

   
Specifications:
Model
SDL-1310-LM-XXXT
Output Power @ 25 ℃
1-1000mW
Wavelength
1310±5nm
Transverse mode
TE00
Operating Mode
CW
Power Stability after warm-up
<1%, <3%, <5% (over 2/4/8 hours)
Warm-up time
< 5 minutes
Beam divergence (1/e2, Full Angle)
< 2.5mrad
Beam diameter end the fiber
62.5um; 100um; 200um
Wavelength stability < 1nm
Polarization ratio >50:1
Point stability after warm-up <0.05mrad
Operating temperature 10~35
Power Supply
90-264VAC or 5VDC, 50/60Hz
Modulation
TTL Modulation or Analog Modulation
Expect Lifetime
10000 hours
Warranty time
1 year
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.
 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.