1064 Light Red Lasers (4W-10W)-www.dreamlasers.com

1064 Light Red Lasers (4W-10W)

DPSS 1064nm Low Noise Laser

Specifications:
Model	SDL-1064-LN-XXXT
Output Power @ 25 ℃	4~20W
Wavelength	1064nm
Operation Mode	CW, TEM₀₀
M2 factor	<1.5
Coherent Length	>1M
Beam Diameter at the aperture	<3.5mm
Beam Divergence (1/e2, Full Angle)	<1.5mrad
Power Stability after warm-up	<1%, <3%, <5% (over 2/4/8 hours)
Point Stability after warm-up	0.05mrad
Noise of amplitude	<1% (RMS, 10Hz - 20MHz)
Dimension of laser head	333 x 140 x 125mm
Power Supply	SDL-PS-800
Input Voltage	90-264VAC, 50/60Hz
Operating Temperature	10℃～35℃
Dimensions of power supply	300 x 162 x 134mm
Expected Operating Lifetime	10000 hours
Warranty time	1year

Note:
	See the Glossary and Technology for information about the terms used
	In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
	Other Sytles and custom designs are available. Contact us to discuss your needs.

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.