DPSS XXXX Laser

DPSS 1064nm Single Longitude Mode IR Laser
 
 

Specifications:
Model		SDL-1064-SLM-3000T
Output Power @ 25 ℃		3000mW
Wavelength		1064±1nm
Transverse Mode		TEM00
Operation Mode		CW
Longitudinal Mode		Single
Noise of Amplitude (rms, 1~20MHz)		<0.1%
Power Stability over 8 hours after Warm-up		<2%
Pointing Stability after Warm-up		<0.05 mrad
Warm-up Time		< 15 minutes
M2 Factor		< 1.2
Beam Divergence (1/e2, Full Angle)		< 1.6 mrad
Beam Diameter at the Aperture		~1000 um
Polarization Ratio		>100:1
Spectral Line width		<0.00001nm
Coherent Length		>50M
Operating Temperature		10℃～35℃
Input voltage		90-265VAC 50/60Hz,
Modulation		TTL Modulation >5KHz by USB
Expect Life Time		10000 hours
Warranty Time		2 years

 
* Better power stability are available on request.
* Other version power supply are available on request.
  1. Current display, power adjustable function version                                 
  2. OEM DC input version
* Analog Modulation >2KHz or higher as option.
* Up to 30Khz TTL modulation on request.
* We do not suggest you using any modulation on LN or SLM version laser, due to the modulation signal will effect the Noise of Amplitude.
* Line output version are available on request.
* Fiber coupled version are available on request.
* Longer warranty on request.
* Other custom-made design is available, please contact us for details.

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.