656nm Red Lasers

DPSS XXXX Narrow Linewidth/Raman Fiber Laser

 

 

Specifications:

Model Number

 

SDL-SFL-RA

SDL-MFL-RA

Output Power at the end of fiber @ 25

mW

Wavelength

±1nm

Spectral Bandwidth

<0.1nm (<0.00001 optional)

Transverse Mode

 

/

Operation Mode

 

CW

Power Stability over 2 hours after Warm-up

<5% (<3%, <1% optional)

Noise of Amplitude (RMS, 1~20MHz)

<1% (<0.5% optional)

Fiber Type

Single

Multi

Fiber Core

um

um

Fiber Connector

 

FC or SMA

Fiber Length

 

1m standard

N.A.

 

0.10

0.22

Warm-up Time

 

<10minutes

Operating Temperature

10℃35℃

Laser Head

SDL-LH-

SDL-LH-

SDL-LH-

Power Supply

SDL-PS-

SDL-LH-

SDL-LH-

Input voltage

DC or 90-265VAC 50/60Hz

Modulation

TTL Modulation >5KHz

Expect Life Time

10000 hours

Warranty Time

1 year

 

 

 

 

 

DPSS XXXX Narrow Linewidth/Raman Laser

 

 

Specifications:

Model Number

 

SDL-RA

Output Power @ 25

mW

Wavelength

±1nm

Spectral Bandwidth

<0.1nm ( <0.00001nm optional)

Transverse Mode

 

TEM00

Operation Mode

 

CW

Power Stability over 2 hours after Warm-up

<5% (<1%, <3% optional)

Noise of Amplitude (RMS, 1~20MHz)

<1% (<0.5% optional)

M2 factor

/

Beam Diameter at the Aperture

mm

Beam Divergence (1/e2, Full Angle)

 

mard

Beam Outline

 

/

Ellipticity

 

/

Polarization Ratio

 

/

Pointing Stability after Warm-up

 

<0.05mrad

Warm-up Time

 

<10minutes

Operating Temperature

10℃35℃

Laser Head

SDL-LH-

SDL-LH-

SDL-LH-

Power Supply

SDL-PS-

SDL-LH-

SDL-LH-

Input voltage

DC or 90-265VAC 50/60Hz

Modulation

TTL Modulation >5KHz

Expect Life Time

10000 hours

Warranty Time

1 year

 

 

 

* Power Supply Option

 

 

SDL-PS-300

SDL-PS-500

SDL-PS-900

 

 

 

 

 

SDL-PS-400

SDL-PS-600

SDL-PS-800

 

 

* Detailed Laser Head and power supply info of each power version will be provided on request.

* 4 or 8 hours Longer operation period output power stability are available on request.

* Better (<3%,<1%) power stability are available on request.

* Other version Laser Head and power supply are available on request.

* Analog Modulation >2KHz or higher as option.

* Up to 30Khz TTL modulation on request.

* We do not suggest you using any electro-modulation on LN or SLM version laser, due to the modulation signal will effect the Noise of Amplitude.

* High frequency AOM modulation on requested.

* Line output version are available on request.

* Fiber coupled system is available on request.

* Longer warranty on request.

* Other custom-made design is available, please contact us for details.