Introduce

UV Lasers

Visible DPSS Lasers

Diode Lasers

Infrared DPSS Lasers

Low Noise Lasers

Single Longitude Mode Lasers

Q-switched/Pulsed Lasers

RGB and RG Lasers

  RGB 635nm Lasers(100-500mW)

  RGB 671nm Lasers(100-500mW)

  RG 635nm Lasers(100-500mW)

  RG 660nm Lasers(100-500mW)

  RG 671nm Lasers(100-500mW)

Laser Pointers

SM Fiber Lasers

Laser Scanner System

 

RGB 635 Lasers

Specifications

Model
SDL-635-XXX-RGB
Output Power @ 25 ¡æ
100-500mW
Wavelength
Red at 635nm, Green at 532nm, Blue at 473nm
Operation Mode
CW
Transverse mode
TE00/TEM00/TEM00
Output power (mW)
500,400,300,200,100
Operating temperature (¡æ)
10-35
Beam divergence, full angle (mrad)
<5
Beam diameter at the aperture (mm)
<6
Expected lifetime (hours)
5000
Dimensions of laser head (mm)
265(L) ¡Á 146(W) ¡Á 77(H)
Input voltage (VAC)
80-260
Dimensions of power supply (mm)
Red: refer to MRL-635 Green and Blue:120(L) ¡Á 60(W) ¡Á 36(H) (adaptor)100(L)¡Á 62(W) ¡Á 55(H) (PC board)
TTL Modulation
Optional, up to 1-10kHz or higher (If request, higher rate up to 40kHz available)
Analog Modulation
Optional, up to 1-10kHz or higher (0~max output when 0~5VDC signal input )
 
Note:
See the Glossary and Technology for information about the terms used
In the front of the laser, we add an infrared filter. The residual IR part is less than 10-3. Please refer to the technology page for more information about the filter.
Other Sytles and custom designs are available. Contact us to discuss your needs.

Home | Company Profile | Lasers | Optics | Crystals | Support | Contact
Copyright © 2002-2005 by Shanghai Dream Lasers Technology Co., Ltd.