|
Introduce
UV
Lasers
Visible
DPSS Lasers
Diode
Lasers
Infrared
DPSS Lasers
Low
Noise Lasers
473nm
Low Noise Lasers
532nm
Low Noise Lasers
532nm
(1-400mW)
532nm
(500-1000mW)
532nm
(2-5W)
593nm
Low Noise Lasers
671nm
Low Noise Lasers
946nm
Low Noise Lasers
1064nm
Low Noise Lasers
1342nm
Low Noise Lasers
Single
Longitude Mode Lasers
Q-switched/Pulsed Lasers
RGB
and RG Lasers
Laser
Pointers
SM
Fiber Lasers
Laser
Scanner System
|
|
DPSS
532nm Low Noise Green Lasers |
|
|
|
|
|
Specifications |
| Model |
SDL-532-XXX-LN
|
| Wavelength |
532nm |
| Operation
Mode |
CW,
TEM00
|
| Output
Power |
1-400mW |
| M2
factor |
<1.2 |
| Power
Stability |
<5%
(RMS, over 2 hours) |
Noise of amplitude
(rms)
|
<1%
|
Warm-up time (minutes)
|
<15
|
| Beam
divergence, full angle (mrad)
|
<1.5
|
| Beam
diameter at the aperture (mm)
|
~1.5
|
|
Beam
height from base (mm)
|
25
|
| Spectral
linewidth (nm)
|
<0.1
|
Polarization
ratio
|
>100:1
(0 or 90 degree)
|
Point stability after warm-up
(mrad)
|
<0.05
|
Operating
temperature
|
10-35¡æ
|
Dimensions
of laser head (mm)
|
136(L) ¡Á
73(W) ¡Á 46(H)
|
| Power
supply |
SDL-PS-300 |
| Dimension
of power supply |
130
(L) x 120 (W) x 62 (H) |
Expected lifetime (hours)
|
>5000 |
|
|
|
| Note:
|
 |
See the
Glossary and Technology
for information about the terms used |
|
In the front of
the laser, we add an infrared filter. The residual IR part is
less than 10-3. Please refer to the
technology page for more information about the filter. |
|
Other Sytles and
custom designs are available. Contact us to discuss your needs. |
|
