Specifications |
| Model |
|
SDL-473-XXXT |
| Output
Power @ 25 ¡æ |
|
1
- 100mW |
| Wavelength |
|
473nm |
| Operation
Mode |
|
CW,
TEM00 |
| Power
stability (rms, over 4 hours) |
|
<5%(over
2 hours) |
| Warm-up
time (minutes) |
|
<15
|
| M2
factor |
|
<1.2 |
| Beam
Divergence (1/e2, Full Angle) |
|
<
1.5mrad |
| Beam
diameter at the aperture (mm) |
|
~2 |
| Spectral
linewidth (nm) |
|
<0.1 |
| Polarization
ratio |
|
>100:1 |
| Noise
of amplitude (rms) |
|
~30% |
| Point stability
after warm-up (mrad) |
|
<0.05 |
| Operating
temperature |
15¡æ¡«30¡æ |
| Dimensions
of Laser head (mm) |
|
142
¡Á 73 ¡Á 46.2mm |
| Power
supply |
|
SDL-PS-100 |
| Input
Voltage |
80-260VAC |
| Modulation |
|
TTL
Modulation or Analog Modulation |
| Dimensions
of power supply |
|
100 x 62 x 42mm |
| Expected
Operating Lifetime |
|
>5000
hours |
| Note:
|
 |
See
the
Glossary and Technology
for information about the terms
used |
|
In
the front of the laser, we add
an infrared filter. The residual
IR part is less than 10-3. Please
refer to the
technology page for more information
about the filter. |
|
Other
Sytles and custom designs are
available. Contact us to discuss
your needs. |
|
|
|
