| Specifications |
| Model |
|
SDL-355-XXXT |
| Wavelength
(nm) |
|
355nm |
| Output
average power (mW) |
|
10-200mW |
| Transverse
mode |
|
~TEM00 |
| Operation
Mode |
|
Frequency
conversion of Q-switched pulsed laser |
| Single
pulse energy (¦ÌJ) |
|
~10 |
| Pulse
duration |
|
~15ns |
| Peak
power (W) |
|
600 |
| Average
power (mW) |
|
Average
power (mW) = Single pulse energy (¦ÌJ) * Rep.
rate (kHz) |
| Ave.
Power stability |
|
<5%
(over 2 hours) |
| Warm-up
time (minutes) |
|
<15 |
| Beam
parameters |
|
Elliptical
(1.5:1) |
| Beam
diameter at the aperture (mm) |
|
~2mm |
| Polarization
ratio |
|
>100:1 |
| Point
stability after warm-up (mrad) |
|
<0.05 |
| Operating
temperature (¡æ) |
|
10-35¡æ |
| Dimensions
of Laser head (mm) |
|
430
¡Á 125 ¡Á 180mm |
| Power
supply |
|
SDL-PS-900 |
| Dimensions
of power supply (mm) |
|
430
¡Á 365 ¡Á125mm |
| Expected
Operating Lifetime |
|
>5000
hours |
| Note:
|
 |
See
the
Glossary and Technology
for information about the terms
used |
|
|
In
the front of the laser, we add
an infrared filter. The residual
IR part is less than 10-3. Please
refer to the
technology page for more information
about the filter. |
|
|
Other
Sytles and custom designs are
available. Contact us to discuss
your needs. |
|
|
|
|
PS.jpg)